Comlube PM+ 2094 Grease Series 2094 EP 1.5 Grease is a superior, high temperature, water resistant, extreme pressure, sulfonate grease.
| ASTM Test | Description | Test Result |
|---|---|---|
| D217 | Consistancy Work Penetration mm/10 | 285-315 |
| Work Penetration 10,000 Strokes | -1% | |
| @ 100,000 Strokes | -2% | |
| 50% water @ 10,000 Strokes | +1% | |
| D566/2265 | Dropping Point °C min | +310°C |
| D4693 | Low Temperature Performance Torque at -40 °C Nom max | 9 |
| D1264 | Water Resistance at 80 °C % max | 1% |
| D1742 | Oil separation, mass % max | 0.1% |
| D1743 | Rust Protection Rating max | 111 |
| D3527 | High Temp Bearing Life Hours, min | 120 |
| D4289 | Elastomer CR Compatibility | |
| Neoprene Volume Change % | 2.8 | |
| Hardness Change % | -3% | |
| Nitrile (NBR-L) Volume Change % | +7.7% | |
| Hardness Change % | 0% | |
| D4290 | Leakage Tendencies grams max. (Wheel Bearing) | 3.4% |
| D2509 | EP Performance OK Load Kg/lbs | 32/72 |
| D2596 | EP Performance | |
| Load Wear Index kg. min | 72 | |
| Weld point kg. min | 500+ | |
| D2266 | Wear Protection Scar Diameter mm max | 0.36 |
| D4170 | Fretting Protection, mass loss mg. max. | 3.4 |
| D1263 | Wheel Bearing Leakage 163 °C | 0.3 |
| D942 | Oxidation Stability PSI 100 hrs | 0 |
| 500 hrs | 2 | |
| 1000 hrs | 9 | |
| D1831 | Roll Stability | +3.6% |
| D4425 | Centrifugal Separation K36 Value at 50 °C | 56/24 |
| Base Oil | ||
| D2161 | Visc. SUS @ 100° F | 600 |
| @ 210 °F | 70 | |
| D97 | Pour Point °C/°F | -17/+2 |
| D92 | Flash Point °C/°F | 245/475 |
for industrial, mining, food processing, agriculture and auto equipment that meets the objective requirements requested and will surpass the new National Lubrication Grease Institute's Standard D4950 GC--LB.
With a work penetration of 1.5 this one grease will replace the present #1 and #2 greases and therefore reduce grease inventories and costly mistakes caused by wrong applications. Comlube's 2094 Grease offers characteristics and qualities unmatched by lithium and aluminum complex greases as substantiated by the ASTM Tests provided. The colour was specially selected for identification purposes so that errors can be elinimated i.e. mixing greases and for visual checks (Food Plants).
To eliminate errors in the selection of lubricants, ASTM Test Data is provided in chart form for easy comparison.
Comlube Technology and future users of this product would like to thank the maintenance personnel and other key people who were involved in the formulation of this superior product.
Contact us for individual applications and compatability.
PM+ 2094 Calcium Sulfonate Grease is now available in an aerosol. The perfect spray Lubricant, it’s tough film strength provides maximum extreme pressure protection for those hard to reach places. Comlube’s PM+ Penetrating Grease contains corrosion inhibitors that protect in most environment.
Agriculture Canada Registered
| ASTM Test | Description | Test Result |
|---|---|---|
| D217 | Consistancy Work Penetration mm/10 | 285-315 |
| Work Penetration 10,000 Strokes | -1% | |
| @ 100,000 Strokes | -2% | |
| 50% water @ 10,000 Strokes | +1% | |
| D566/2265 | Dropping Point °C min | +310°C |
| D4693 | Low Temperature Performance Torque at -40 °C Nom max | 9 |
| D1264 | Water Resistance at 80 °C % max | 1% |
| D1742 | Oil separation, mass % max | 0.1% |
| D1743 | Rust Protection Rating max | 111 |
| D3527 | High Temp Bearing Life Hours, min | 120 |
| D4289 | Elastomer CR Compatibility | |
| Neoprene Volume Change % | 2.8 | |
| Hardness Change % | -3% | |
| Nitrile (NBR-L) Volume Change % | +7.7% | |
| Hardness Change % | 0% | |
| D4290 | Leakage Tendencies grams max. (Wheel Bearing) | 3.4% |
| D2509 | EP Performance OK Load Kg/lbs | 32/72 |
| D2596 | EP Performance | |
| Load Wear Index kg. min | 72 | |
| Weld point kg. min | 500+ | |
| D2266 | Wear Protection Scar Diameter mm max | 0.36 |
| D4170 | Fretting Protection, mass loss mg. max. | 3.4 |
| D1263 | Wheel Bearing Leakage 163 °C | 0.3 |
| D942 | Oxidation Stability PSI 100 hrs | 0 |
| 500 hrs | 2 | |
| 1000 hrs | 9 | |
| D1831 | Roll Stability | +3.6% |
| D4425 | Centrifugal Separation K36 Value at 50 °C | 56/24 |
| Base Oil | ||
| D2161 | Visc. SUS @ 100° F | 600 |
| @ 210 °F | 70 | |
| D97 | Pour Point °C/°F | -17/+2 |
| D92 | Flash Point °C/°F | 245/475 |
Chain Drives, Open Gears, Machine Tools, Wire Rope, Cables & Winches, Dies & Moulds, Ways & Guides Material Handling Equipment, Wheels & Gears, Pumps
Brakes Cables, Door and Hood Hinges, Seat Slide Rails, Radio Antenna, Windshield Mechanisms and many other uses.
Comlube’s PM+ Penetrating Grease contains No Hazardous Ingredients.
12 x 312 gram cans per case.
Shake frequently. For hard to reach locations use the extension tube. 2094 Penetrating Grease can be applied inverted.
PM PLUS Oil Concentrate is a blend of specially selected hydrocarbon oils, containing no solvents, detergents or solid particles. It is specifically formulated for use in most synthetic and petroleum oils. PM PLUS Oil Concentrate unites chemically with the metal component molecules, forming a microscopic friction reducing shield, that resists breakdown under extreme conditions.
PM PLUS Oil Concentrate will assist in reducing friction , wear, temperature, replacement of parts, downtime, costly maintenance expenditures and energy consumption. It will also assist in increasing productivity the service life of your equipment , and create a more economical and controllable maintenance operation.
Available in:
| ASTM Test | Description | Test Result |
|---|---|---|
| D1298 | Specific Gravity at 60°F | 1.0 |
| D445 | Viscosity at 100°F S.U.S. | 68.8 |
| Viscosity at 210°F S.U.S. | 34.5 | |
| D92 | Open Cup Flash Point | 147°C |
| D97 | Pour Point | -53°C |
| Cloud Point | -18°C | |
| D482 | Ash Content % by Weight | 0.01% |
| D974 | TAN (mg KoH/g) | 0.63 |
| D665 | Rust Syn, Sea Water | Passed |
| D130 | Copper Strip Corrosion | 1.a. Pass |
NOTE: The information and data presented herein are based on tests, reports and research we believe to be accurate and reliable. The information and data are provided without warranty, guarantee or liability on our part, and are therefore, provided to customers for their owninvestigation, verification and consideration.
can also be blended with most conventional metal cutting and machining oils at a ratio of 5%-10%. The blend will assist in maintaining the cutting edges of the tools, thus increasing tool life. It will also allow for more material to be removed per pass and provide a smoother finish.
Apply at a ratio of 5%(min)= 50 ml for every litre, or 8 oz for every gallon of base lubricant. Some application may require a higher percentage, but should not exceed 10%.
PM PLUS Penetrant Lube Shield is a specially formulated non-flammable penetrant, containing a the latest calcium sulfonate rust inhibitor and extreme pressure agents for superior protection and strength. Extreme Pressure agents unites chemically with the metal component molecules, forming a microscopic friction reducing shield, that resists breakdown under extreme conditions without the use of solid particles.
PM PLUS Penetrant Lube Shield will reduce friction, wear, temperature, replacement of parts, downtime, costly maintenance expenditures and energy consumption. It will the service life of your equipment and create a more economical maintenance operation.
Available in industrial size units of:
| ASTM Test | Description | Test Result |
|---|---|---|
| D1298 | Specific Gravity at 60°F | 0.89 |
| D92 | Open Cup Flash Point | NON-FLAMMABLE |
| D97 | Pour Point °F/°C | -70°F / -57°C |
| D130 | Copper Strip Corrosion test at 140°F for 3 hours | 1.a. PASS |
| D117 | Dielectric Strength | 43 kV |
NOTE: The information and data presented herein are based on tests, reports and research we believe to be accurate and reliable. The information and data are provided without warranty, guarantee or liability on our part, and are therefore, provided to customers for their owninvestigation, verification and consideration.
is nonflammable which provides an important margin of safety where potential hazards exist. Its high dielectric strength permits effective cleaning and retardation of electrical corrosion.
PM PLUS Penetrant Lube Shield aerosol uses the ACC-SOL trigger mechanism that will allow the product to be dispensed when the container is inverted, as well as provide a more comfortable holding position.
Apply in the appropriate manner to any mechanical or electrical device. It will penetrate, clean and deposit a wear resistant shield of extreme pressure lubricant to the critical areas. It will drive out moisture and guard against rust. With the high concentration of extreme pressure lubricant only a small amount is required. Fewer applications make PM PLUS Penetrant Lube Shield very cost effective.
PM PLUS Penetrant Lube Shield aerosol should be used with adequate ventilation. Some plastics, rubber and paint finishes may be adversely affected by over spray. Test first to insure a safe application.
Comlube PM+ 2094 Grease Series 2094 EP 1.5 Grease is a superior, high temperature, water resistant, extreme pressure, sulfonate grease.
Available in 125 ml and 475 ml.
Coming soon. Please contact us for more information.
Memolub HPS, EPS 24V, and PLCd lubricators are single or multiple points lubricators. Memolub are remote and reusable lubrication systems that can meet any lubrication needs.
| HPS | EPS 24V | PLCd | |
| Cartridge volume | 120 cm3, 240 cm3, or 480 cm3 | ||
| Output settings | 7 main settings and many additional settings | Unlimited settings by PLC | |
| Maximum stroke pressure | 25 bar / 350 psi | ||
| Batteries / Power Supply | Alkaline battery 4,5 V DC (AA-LR6) | External 24 V DC | External 24 V DC |
| Remote Installation | Up to 8 metres / single point - ⌀ 8 mm tubing | ||
| Lubricants | Oil and grease (up to NLGI #2 with an oil base up to 1500 cSt) | ||
| Operating temperature | -15°C to 50°C | ||
| Connections | 1/4 BSP | ||
| Control detector | Progressive distributor for 4, 6 and 8 outputs | ||
Universal model with battery power supply, allowing it to be used in all types of environments and applications. This model provides regular, accurate and reliable lubrication.
Ideal for lubrication functionary on an irregular basis. The frequencies of the MEMO are stored.
Unlimited settings with possible machine feedback.
Significantly reduce engine wear and corrosion by removing contaminants down to 1 micron in size, as well as 100% of water to assist in reducing soot, carbon, and acid buildup.
Filtakleen By-Pass Filtration Systems extends oil life by as much as 5 times longer in-between oil changes, as well as increasing the life of full-flow filters and of the machinery. Increase fuel efficiency by as much as 3%, and effectively reduces emissions. Quick and easy to install and replace filter cartridges.
Available in:
| Heavy Duty | Maxi Duty | |
| Kit | FFHY778 | FFMY788 |
| Filter Colour | Blue | |
| Sump/Tank Capacity | 900 litre | 2000 litre |
| Flow Rate | 4.5 L/min | 6 L/min |
| Filter Body | Aluminium | |
| Weight (exc fittings) | 3.3 kg | 4.4 kg |
| Inlet Connection | 1/4 bsp | |
| Outlet Connection | 3/8 bsp | |
| Inlet Pressure | 350 bar (5000 psi) | |
| Internal Pressure | 4.45 bar (65 psi) | |
| Max Oil Temp | 79°C | |
| Viscosity Range | 9-220cSt | |
Coming soon. Please contact us for more information.
Ultra-fine 1 micron Bypass filtration system suitable for use with a wide range of equipment. It provides the best possible filtration protection against system wear, oil degradation, rust and corrosion. Working in conjunction with the equipments full flow filter, the Filtakleen By-Pass Filter removes any particles in the oil likely to cause system damage.
Available in:
| Light Duty | Heavy Duty | Maxi Duty | |
| Kit | FF668 | FF878 | FF988 |
| Filter Colour | Red | Blue | Blue |
| Sump/Tank Capacity | 14 litre | 36 litre | 72 litre |
| Flow Rate | 3.0 L/min | 4.5 L/min | 6 L/min |
| Filter Body | Aluminium | ||
| Weight (exc fittings) | 1.8 kg | 2.8 kg | 3.9 kg |
| Inlet Connection | 1/4 bsp | ||
| Outlet Connection | 3/8 bsp | ||
| Inlet Pressure | 4.45 bar (65 psi) | ||
| Internal Pressure | 4.45 bar (65 psi) | ||
| Max Oil Temp | 79°C | ||
| Viscosity Range | 9-220cSt | ||
Coming soon. Please contact us for more information.
Light Duty Replacement Cartridge
| Height | 114 mm |
| Diameter | 102 mm |
| Filter Length | 114 m |
| Surface Area | 130 000 cm² |
| Weight | 300 g |
Heavy Duty Replacement Cartridges
| Height | 114 mm |
| Diameter | 145 mm |
| Filter Length | 272 m |
| Surface Area | 490 000 cm² |
| Weight | 630 g |
Maxi Duty
| Height | 114 mm |
| Diameter | 190 mm |
| Filter Length | 460 m |
| Surface Area | 524 000 cm² |
| Weight | 1060 g |
Coming soon. Please contact us for more information.